Dry seed should be placed into a paper envelope with the edges sealed with tape to prevent the fine seed from leaking out. Intact seed pods should also be placed into an envelope incase the pod cracks in transit. Both packets of seed and pods need to be plaved into a rigid container such as a Post Pak CD mailer to prevent the contents being crushed in transit. Please send seed or pods on a Monday so that there is less chance of the parcel getting delayed in the post over a weekend.
Leads need to be sent in a rigid container such as a small box to prevent crushing in the post. They also need to be kept moist to prevent the leads drying and the dormant buds from shrivelling. Wrap a little sphagnum moss of damp tissues around the base of the lead and then cover the end of the lead with a small plastic bag to keep the rest of the parcel dry. Don’t cover the leaves with plastic or they will swet. Send to the lab by Express Post. Please let the lab know that you have some leads to send so that we can have media ready to culture the lead ASAP.
The time required varies greatly depending on the genus of the orchid and whether it is a hybrid or a species. Hybrids tend to grow much faster than species. Some Phalaenopsis seedlings may only take 7 months to be ready to deflask while Pleiones that require two periods of dormancy in flask take 2 to 2.5 years. Most hybrid Cymbidiums and Dendrobium seedlings will be ready to deflask within 12 months.
The time required is even more variable than for seedlings because it depends on how many clones of each variety that you order. If you order 100 Cymbidium clones it may take 12 months while if you order 1000 clones it may take 18 months because tyer is the extra time involved in multiplying the initial 100 plants into 1000. It usually takes longer to clone other genera and Dendrobiums usually take 18 months for 100 plants.
Cymbidium hybrids are the most sucessful at about 95%, Dendrobium hybrids about 65%, Sarcochilus hybrids 80% and Cattleya hybrids 50%. Species are much more difficult to clone.
We don’t need to know what the name of your plant is, just use a code number that you write down where you won’t loose it. Please give as much information as possible about your plant to give us the best chance possible to grow it. Tell us the genus, and any specific requirements such as: it grows in alpine conditions, is very tropical, is it a species, does it grow on limestone or in a peat bog?
See the page on ‘How to produce Orchid Seed’ for detailed information.
See the page on ‘Preparation of Plants to be Cloned’ for detailed information.
The number depends on your requirements. You will obtain the largest plants if you order Maxi flasks of 25 plants and progressively smaller ones if you order 30 plants or 40 plants per flask. More plants per flask result in slightly less expensive plants.
Not necessarily. Some commercial growers request their plants supplied at about 2/3 full sizebecause they tend to be easier and faster to deflask. This does require better deflasking conditions than for larger plants. Please let the lab know well in advance if you prefer 2/3 size plants.
You can, however you need to advise the lab when you place your order. We time the various stages of the process to try to have the plants ready when you require them. This is not always possibly because of the differing growth rates of individual crosses. We do not hold plants when they are fully grown because they will deteriorate on storage. We prefer to delay the earlier stages of growth to get the plants ready at the correct time of the year.
We routinely deliver our flasks by TNT Express and they need the following information: Your street address and not a PO Box number, your daytime phone number, email address and somewhere the courier can leave the parcel if you are not at home.